- 10.3 fluid ounce cartridge
- Composition: one-part, neutral cure, RTV silicone sealant
- All temperature gunnability
- Easy tooling
- Low odor
- ±50% joint width movement
- Ideal RTV silicone sealant for building expansion joints
- Structural and non-structural glazing and weathersealing of glass, metals, and plastic components
- Case quantity: 12 cartridges
- Pallet quantity: 108 cases
- 1,296 cartridges per pallet
Product Overview
Dow 795 silicone sealant (formerly Dow Corning 795 silicone sealant) consists of a single component, provides medium elasticity and is comprised of a neutral-cure silicone sealant architectural-grade formula. Dow 795 silicone sealer cures to a strong, yet flexible, silicone rubber joint seal and allows significant joint movement when applied according to the manufacturer's directions. This Dow 795 RTV architectural grade silicone caulking sealant easily applies in any weather and cures quickly at room temperature. Dow 795 sealant, comprised of non-sagging silicone material, cures to a medium-modulus silicone rubber when exposed to moisture in the air. The Dow 795 series sealants can withstand ± 50% movement of the original joint area when installed in an adequately designed weatherseal joint. In a properly designed structurally glazed joint, the sealant is strong enough to support glass and other panel materials under high windloads. Dow 795 building sealant is quite suitable for most new construction and remedial sealing applications.
Applications
- glass
- aluminum
- steel
- painted metal
- EIFS
- granite and other stone
- concrete - Primer P recommended
- brick - Primer P recommended
- plastics
Recommended Uses
- Structural and nonstructural glazing
- Structural attachment of many panel systems
- Panel stiffener applications
- To weather-seal common construction materials
Limitations
Dow 795 silicone building sealant should not be used:
- in below grade environments
- when surface temperatures exceed 122°F during installation
- on surfaces that are continuously immersed in water
- on building materials that bleed oils, plasticizers or solvents that may affect adhesion
- on frost laden or wet surfaces
- to be painted
- to surfaces in direct contact with food or other food-grade applications
Additional Resources
Selection
| SKU | Color / Finish | Sample | Case Qty |
|---|---|---|---|
| 795BL | Black |
 |
12 |
| 795W | White |
 |
12 |
| 795DR | Dusty Rose | 12 | |
| 795GRY | Gray |
 |
12 |
| 795BRZ | Bronze |
 |
12 |
| 795L | Limestone |
 |
12 |
| 795CH | Charcoal |
 |
12 |
| 795S | Sandstone |
 |
12 |
| 795NST | Natural Stone |
 |
12 |
| 795AT | Adobe Tan |
 |
12 |
| 795AAL | Anodized Aluminum | 12 | |
| 795RB | Rustic Brick | 12 | |
| 795BS | Blue Spruce | 12 | |
| 795CHP | Champagne | 12 | |
| 795IG | Ivy Green |
|
12 |
Product Specifications
| Brand | Dow |
|---|---|
| Series | 795 |
| Container Size | 10.3 fl. oz. |
| Container Type | Cartridge |
| Composition |
One-part, neutral-cure, RTV silicone sealant
|
| Indoor / Outdoor usage | Both |
| Paintable | No |
| Tack-free time at 50% RH | 3 hours |
| Peel strength | 32 pounds per inch |
| Curing time at 50% RH | 7 - 14 days at 77°F |
| Full adhesion | 14 - 21 days |
| Flow, sag or slump | .1" |
| Durometer Hardness, Shore A | 35 points |
| Joint movement capability | +/- 50% |
| Tension adhesion strength as cured after 21 days at 77°F and 50% RH | At 25% extension: 45psi / at 50% extension: 60psi |
| Application temperature range | < 122°F |
| Working time | 20 - 30 minutes |
| Service temperature range | -40 to 300°F |
| Usable life and storage | 12 months when stored at or below 77 degrees F (use-by date stamped on each unit) |
Dow 795 Silicone Building Sealant meets the requirements of:
- Federal Specification TT-S-001543A (COM-NBS) Class A for silicone building sealants
- Federal Specification TT-S-00230C (COM-NBS) Class A for onecomponent building sealants
- ASTM Specification C 920 Type S, Grade NS, Class 50, Use NT, G, A and O
- ASTM Specification C 1184 for structural silicone sealants
- Canadian Specification CAN2-19.13-M82
