Tremco Dymonic 100 is a high-performance, medium modulus, low VOC, UV stable, non-sag polyurethane sealant. Dymonic 100 is formulated with an innovative polymer technology similar to TREMproof 250GC and Vulkem 45SSL. Dymonic 100 is very versatile and has a unique capability to adhere to damp or green concrete. Dymonic 100 is a durable yet flexible sealant that offers outstanding performance in moving joints and exhibits relentless adhesion once this polyurethane sealant fully cures. Typical applications for Dymonic 100 include expansion and control joints, precast concrete panel joints, perimeter caulking of windows, door and panels on substrates such as aluminum, masonry and vinyl siding. Dymonic 100 is also suitable for water immersion. Tremco Dymonic 100 polyurethane sealant can adhere to damp or green concrete and has a skin time of 2 hours with a tack-free time of 6-8 hours which significantly reduces dirt pickup. Vulkem 100 has a movement capability of +100/-50% in typical field conditions, is low-VOC, paintable, jet fuel resistant and will not crack yellow or craze under extreme UV exposure. Dymonic 100 generally cures at a rate of 3/32 inches per day at 75 °F and 50% RH. The cure time will increase as temperatures and/or humidity decreases. A good rule of thumb is to add one additional day for every 10 °F decrease in temperature. As far as clean-up is concerned, excess sealant and smears adjacent to the joint interface can be carefully removed with xylene (use caution since this a hazardous material) or mineral spirits before the Dymonic 100 polyurethane sealant cures. Any utensils used for tooling can also be cleaned with xylene or mineral spirits.
Green and damp concrete
Expansion and control joints
Cast-in-place / tilt up
Precast concrete panel joints
Reservoir; for use in non-treated, non-potable water
Door and window perimeters
Plastics and vinyl
Weather seal glazing
Use with adequate ventilation.
Always utilize the accompanying MSDS for information on Personal Protective Equipment (PPE) and Health Hazards.
Not recommended for use in chlorinated, potable, heavy or waste water.
Although Dymonic 100 is paintable, this does not imply adhesion to and compatibility with all paints. Consult Tremco Technical Bulletin No. S-09-05 for more information.