Sika Remover 208 Cleaning Agent - 1 Liter Bottle

Sika Remover 208 is a cleaning agent for surface preparation and the removal of uncured adhesives and sealants. Sika Remover 208 is used to remove traces of Sikaflex products as well as for cleaning painted substrates.Areas of Application Sika® Remover-208 can be used to remove uncured excess material of Sikaflex® adhesive or sealant from application tools or from soiled surfaces. Sika® Remover-208 can also be used for the pre-cleaning of strongly contaminated non-porous substrates. Sika® Remover-208 can be used to clean painted surfaces prior to bonding. This product is suitable for professional, experienced users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility. Method of Application Removal of uncured adhesive Remove the bulk of the Sikaflex® residue with a knife or spatula. Moisten a rag or towel with Sika® Remover® -208 and wipe off the remaining adhesive or sealant. Surface cleaning Wipe painted surfaces with a moistened rag or towel with Sika® Remover -208. Wet the paper towel by pouring the Sika® Remover 208 onto the cloth. Do not dip towel into the can as there is risk of contamination. Wipe the surface with the wetted paper towel. Use fresh paper towels regularly in order to maximize cleaning power and minimize recontaminating surface. Before the solvent evaporates, wipe off with a fresh, clean, dry paper towel. Repeat above process as necessary until no contaminant is visible on a clean paper towel. Do not use on sensitive surfaces such as fresh paints, particularly one pack air drying paint systems. Reseal container immediately after use.