GE SCS1700 Series Sanitary Silicone Sealant With Fungicide - 10.1 Fluid Ounce Cartridge

See more by

General Electric

$8.99 each

24 or more|$8.70 each

10.1 fluid ounce cartridge
Sealant type: silicone; sanitary
Durability: once cured, silicone is waterproof and crackproof and will remain flexible over time
Excellent mold and mildew resistance
Excellent weather-resisting properties
Adhesion: primeless to most substrates
Case quantity: 24 cartridges
Pallet quantity: 45 cases
1,080 cartridges per pallet

SKU

SCS1702

In Stock

Color Chart

Return Policy | Shipping Policy

Product Overview

General Electric SCS1700 sanitary silicone sealant is perfect for use in areas that are prone to mildew formation such as showers, tubs, and plumbing fixtures in high humidity areas. GE Sanitary 1700 is a cured sealant which is mold and mildew resistant. Sanitary SCS1700 silicone sealant is a one-component, acetoxy cure silicone containing a fungicide and is also useful when applied to a wide variety of materials commonly found in locker rooms, swimming pool area and restrooms. Sanitary SCS1700 silicone sealant is supplied as a paste and once it cures, produces a durable silicone rubber seal.

Applications

bathtubs
shower stalls
wall fixtures
sinks
countertops
soap fixtures
air dryers
drains
grouting and bedding some ceramic tiles
interior and exterior applications where areas are prone to mold and mildew formation

Limitations

SCS 1700 is not recommended:

For use underwater or in other applications where the product will be in continuous contact with water.
For use in food contact applications.
When painting of the cured sealant is desired unless appropriate specialized paint products are used such as GE SEC2400 SilShield*.
For use on aquariums as leaching of the fungicide can occur.
For use on surfaces with special coatings, such as mirrors, without testing and approval of the manufacturer of the article.

SCS 1700 should not be applied or used:

Under exceedingly hot or cold conditions (see Sealant Typical Properties table)
On wet, damp, frozen or contaminated surfaces
On excessively basic or acidic substrates
On concrete, marble, limestone, lead or lead coated surfaces
In designs or applications where the silicone is encapsulated and without access to atmospheric moisture needed to cure

Additional Resources

Technical Data Sheets

Data Sheet

Selection

SKU	Color	Case Qty
SCS1705	Almond	24
SCS1702	White	24
SCS1701	Clear	24

Product Specifications

Brand	General Electric
Series	SCS1700
Container Size	10.1 fl. oz.
Container Type	Cartridge

Consistency	Paste
Polymer	100% silicone
Indoor / Outdoor usage	Both
Paintable	Yes when using GE SEC2400 SilShield
Tooling time	5 - 10 minutes
Tack-free time	30- 45 minutes
Ultimate tensile strength	292 psi (2.0 MPa)
Application temperature range	40 to 122° F
Service temperature range	55° to 350° F
Joint movement capability	±25%
Ultimate Elongation	373%
Peel strength	30.4 pli
Cure time	24 - 48 hours
Weathering and UV resistance	Excellent
Shelf life	24 months

Additional technical information, literature, laboratory testing and application engineering may be available upon request from Momentive Performance Materials (MPM). Any technical advice furnished by MPM or any representative of MPM concerning any use or application of any MPM product is believed to be reliable but MPM makes no warranty, expressed or implied, of suitability for use in any application for which such advice is furnished.