Climate Self-Leveling Polyether Adhesive Sealant - 20 Fluid Ounces

Climate Self-Leveling Polyether Gray Adhesive is a highly elastic, moisture-curing, sealant designed for horizontal expansion joints and cove joints to be applied on concrete, tile, and masonry substrates. Climate Self-Leveling Polyether Gray Adhesive Sealant can also be used for deep applications such as roof and foundation penetrations. Climate Self-Leveling Polyether Gray Adhesive Sealant can be applied at a wide range of temperatures from 100°F, down to 302°F. In horizontal joints, Climate Self-Leveling Polyether Gray Adhesive Sealant levels to a smooth, glossy finish that rarely requires tooling. Where performance is critical, a primer may be required, as well as an appropriate sized backer-rod. Prepare joints by removing dirt and debris with a wire brush and air blow to clean out joint. Do not use petroleum solvent. Prime interior surfaces before inserting backer-rod. Climate Self-Leveling Polyether Gray Adhesive Sealant skins over in about 30 to 45 minutes. Sealed joints will not be able to bear traffic for 24 hours. Climate Self-Leveling Polyether Gray Adhesive Sealant is paintable in two days.

APPLICATIONS

• EPDM and SBS Mod Bit
• Asphalt Shingles
• Aluminum and Galvanized Metal
• Stainless Steel
• Engineered Plastics, PVC
• Glass Fiberglass FRP
• Wood
• Block and Brick
• EPS Foam
• Concrete and Stone
• EIFS, Stucco

Recommended Uses

• horizontal expansion joints and cove joints on tile, concrete and masonry substrates
• roof and foundation penetrations