How to use Wood's Powr-Grip 10" Vacuum Cup

When displaying less than 100% vacuum left, simply pump the plunger until you reach the original vacuum pressure without removing the cup from the glass! To release, just depress a trigger on the opposite end of the handle from the plunger. Never exceed the recommended weight limit of this cup. CAUTION: Cups must be kept clean and stored in carrying case when not in use.

IMPORTANT: Small cuts cause leaks.

For detailed instructions directly from the manufacturer, please visit Wood's Powr-Grip W6450. Note: manufacturer's sku is N6450.

DISCLAIMER: These instructions are from the product manufacturer. PK Supplies Inc. makes every effort to ensure that these instructions are accurate. By following these instructions you agree that PK Supplies Inc. is not liable for any damages or losses caused by these instructions.

Instructions can be used for...

Wood's Powr-Grip 10" Vacuum Cup W6450